Patent Pending
Need tie-back connectors on a super lightweight SRL-P? Boom... Done!
The 8' FT-X Tie-Back is a Class 1 personal SRL with tie-back capability along the full length of the lifeline. Tie-off directly or around anchorages as you need for maximum productivity and safety.
Patent Pending
Need tie-back connectors on a super lightweight SRL-P? Boom... Done!
The 8' FT-X Tie-Back is a Class 1 personal SRL with tie-back capability along the full length of the lifeline. Tie-off directly or around anchorages as you need for maximum productivity and safety.
LIGHTWEIGHT
COMFORTABLE
CLASS 1
8' FT-XTM Tie-Back Class 1 SRLs
This personal SRL is available with single or twin retractables and equipped with 5k rated gate connectors for tie-back applications. Approved to connect directly to the anchors with leg-end conncector or tie-back around an anchorage to any point on the lifeline. Replacement retractables are also available separately for twin unit only.
ERGONOMIC COMFORT
The 8’ FT-X™ Tie-Back SRLs streamline profile provides a higher level of comfort. The FT-X Tie-Back rests high and tight inside your back’s ergonomic comfort zone, making comfortable all day worker movement a reality. No more aching backs accomplished.
SPEEDLINKTM
AN INDUSTRY FIRST
With SpeedLink™, if one or both units fail inspection before use, you only replace the damaged retractable, saving valuable time, labor, and expense. As a result, the FT-X™ devices offer the lowest overall cost of ownership of any Class 1 SRL-P.
You no longer have to remove costly SRL-Ps from service and purchase a new device when just one retractable does not pass inspection.
- Insert Spanner Tool into SRL Speedlink™ component buttons.
- Hold Spanner Tool in place to allow the red component button pins to be fully exposed.
- Slide the locking pin out to discard the damaged SRL.
EXTENDED WEIGHT CAPACITY
The 420 lb extended capacity energy absorber has a low-profile shape that reduces heat and sweat build up, and is protected by an abrasion resistant cover. It's essentially a go anywhere for anyone device.
FT-XTM Tie-Back Product Line-up
Approved to connect directly to the anchors with leg-end conncector or tie-back around an anchorage to any point on the lifeline.
The 8' FT-XTM Tie Back FAQ
If a twin 8’ FT-X Tie-Back retractable does not pass inspection, I can replace just the retractable in the field with a replacement unit and continue working?
With SpeedLinkTM yes, you can. SpeedLink is an industry-first personal SRL innovation. Any 8’ FT-X Tie-Back twin retractable unit that does not pass inspection for any reason, such as a damaged or worn lifeline, can be replaced in the field. Unit must be inspected by a Competent Person before returning to service.
How do I replace a retractable unit?
For maximum productivity in the field first, order replacement retractables ahead of time. Then it's easy and quick to replace a retractable with our SpeedLink spanner tool. Easy-to-follow instructions and important safety warnings are available here. Spanner tools are available by ordering them directly from FallTech by clicking the button below.
CONTACT SALES
A fall protection expert will reach out to you shortly.